Loading tab paper into Paper Feeder Unit PF-602m

Example: 3 tab papers are inserted into each of 3 finished sets (a total of 9 tab papers)

Loading orientation

Stacking order

Finished set

  1. Withdraw the tray to be loaded with tab papers.

    Withdraw the tray specified for a tab paper size.

  2. Turn the side guide fixing knobs of the side guide plate to loosen them.

  3. Load tab papers into the tray.

    • supplementary explanationLoad tab paper into Paper Feeder Unit PF-602m, referring to the illustration shown above.

    NOTICE
    • Do not load above the limit level indicated on the side guide plate of the tray.

  4. Align the side guide plate to the edge of tab papers, then turn the side guide fixing knobs to fix them.

    NOTICE
    • Be sure that the side guide plate and rear guide plate are securely aligned to tab papers. If 1 mm or more of a gap is found or tab papers skew in the tray, feeding trouble may be caused.

  5. Align the rear guide plate to tab papers.

  6. Push in the tray until it locks into place.