Mounting the feeding extension tray (Multi Bypass Tray MB-506)

Mount Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m (feeding extension tray) in Multi Bypass Tray MB-506.

  1. Push down the paper detection sensor of Multi Bypass Tray MB-506 and put Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m (feeding extension tray) on the bypass tray from top right to cover it.

  2. Press the covered Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m (feeding extension tray) into the machine. 

  3. Extend the extension guide.

  4. Hook the top of the wire rope (ball end) to the fitting on the machine.