Loading small-size paper into Paper Feeder Unit PF-602m

The minimum width between the side guide plates of Paper Feeder Unit PF-602m is 139.7 mm / 5.5". To load paper of which the size is less than the minimum width, open the small size guides and place paper inside them.

Available small sizes for tray 3 (upper tray) and tray 4 (lower tray) differ. See the following table for details.

Small sizes

Without using small size guides

Using small size guides

Tray 3 (Upper tray)

Tray 4 (Lower tray)

Tray 3 (Upper tray)

Tray 4 (Lower tray)

A5 long edge feed

N/A

Available

N/A

N/A

A5 short edge feed

N/A

N/A

Available

Available

B6 short edge feed

N/A

N/A

Available

Available

  • preconditionWhen loading a paper size larger than the minimum width between the side guide plates, do not open the small size guides.

  • preconditionBe sure to open small size guides as a pair when using the small size guides. Do not open only a half of them to load paper.

  1. Withdraw the tray.

    NOTICE

    • Trays cannot be withdrawn when the machine is not powered. Be sure to turn the sub power switch ON.

    • Only one tray can be withdrawn at a time.

  2. Move the front and rear side guide plates closer until they stop.

    • supplementary explanationTurn the side guide fixing knobs (4 pieces) of the side guide plate counterclockwise to loosen them.

    • supplementary explanationPushing the lock release lever of the front side guide plate, move the front and rear side guide plates closer until they stop.

  3. Open the small size guides provided for each of the front and rear side guide plates.

    NOTICE

    • The small size guides cannot be opened unless the front and rear side guide plates are moved closer to stop.

  4. Adjust the position of side guide plate.

    • supplementary explanationPushing the lock release lever of the front side guide plate, move the side guide plate to an appropriate position according to the size indication provided on the tray bottom plate.

    • supplementary explanationTurn the four side guide fixing knobs clockwise to fix them.

  5. Load paper with the print side up.

    • supplementary explanationAlign the stack of paper to the feed roller side of the tray.

    • supplementary explanationPushing the lock release lever of the rear guide plate, align it to the edge of the paper.

    NOTICE

    • Do not load above the limit level indicated on the small size guides.

    • Be sure that the rear guide plate is securely aligned to the paper. If any gap is left between the rear guide plate and paper, the machine cannot detect the correct paper size, and paper jams or machine trouble may be caused.

  6. Push in the tray until it locks into place.

    The paper level indicator of the tray changes from to on the MACHINE screen and COPY screen.