Mounting Output Extension Tray (Finisher FS-532 / Output Tray OT-510)

Mount Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m (output extension tray) in Finisher FS-532 or Output Tray OT-510.

  1. Press FS Main Tray Replace on the MACHINE screen.

    The dialog box is displayed, and the main tray lowers (approx. 5 cm).

  2. Insert the brackets (A) of Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m (output extension tray) into the slots (a) of main tray.

  3. Insert the brackets (B) of Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m (output extension tray) into the slots (b) of main tray while carrying out the adjustment by hand.

  4. Extend the tray extension of Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m (output extension tray).

  5. Press Close on the dialog box.

    The main tray lifts and returns to the original position.