Overview of Staple (2-Sided + Full Size Print)

Impose an A4-size PDF document with 32 pages on A4 papers and print on 2 sides, and then finish with staple.

Example Introduced in This Section

Finisher FS-532 is required (refer to Finisher FS-532).

Intended Environment

Operating system

Windows 7

Application

Adobe Acrobat Reader DC

Printer driver

PS Plug-in Driver

Image Controller

Image Controller IC-605

Mounted finisher

Finisher FS-532

* The sample screen may be different from the actual display depending on your system environment and application version/revision.

Workflow

Setting printer driver

Checking the finishing

Check the finishing of the printed document, then make adjustments with reference to the link if needed.

Recommended Combination

  • Stamp: You can insert Date/Time, Page Number and Copy Number in each page at the time of printing. (Stamp tab of the printer driver. Refer to Stamp Screen.)

  • 1-sided or 2-sided print on a page basis: You can set 1-sided or 2-sided print for each page. (Page Settings tab of the printer driver. Refer to Page Settings Screen.)

Precautions

  • Prior to printing, make sure of the following when performing setting and operation.

  • Load the papers and configure the paper settings (refer to Setting Paper in a Paper Tray/Paper Setting/Registering or Deleting a Paper Profile)

  • To reproduce stable colors, in addition to regular calibration, make other pre-output image quality adjustments as necessary, such as when changing screens or papers or when hue is important. For details, refer to Image Quality Adjustment Using Image Controller.

  • To adjust the image positions of front and back sides of printing, make pre-output image quality adjustments. For details, refer to Both-Side Adjustment Flow.

  • If you cannot set this function, make sure that the optional device has been correctly mounted.

  • Match the original orientation and the orientation of the paper in the paper tray.