User's Guide
- Home
- Menu
× Menu Useful Software If you have a problem…
- FAQ
- Troubleshooting
HOMEOutput data in various finishing formsBanner: Printing on Banner PaperRemoving the extension trayRemoving the output extension tray (Output Tray OT-511 or Relay Unit RU-518)
Menu
Output data in various finishing forms
- Selecting Finishing
- Imposing Both Sides
- What is 2-Sided Printing?
- 2-Sided Print: Imposing A4 Original on A4 Paper (Full Size Print)
- 2-Sided Print: Imposing A4 Original on A4 Paper by 2 in 1 (2 in 1 + 2-Sided)
- Book Spread Print: Imposing Mixed Sized Original
- Book Spread Print: Imposing Mixed Sized Original in Book Spread
- Staple: Stapling
- What is Staple?
- Staple: Imposing A4 Original on A4 Paper (2-Sided + Full Size Print)
- Staple: Imposing A4 Original on A4 Paper by 2 in 1 (2 in 1 + 2-Sided)
- Booklet: Imposing each Page for Fold & Staple
- What is Booklet Printing?
- Booklet: Imposing A4 Original on A3 Paper (Full Size Print / A4 Size Finishing)
- Booklet: Imposing A4 Original on A4 Paper (Reduced Print / A5 Size Finishing)
- Perfect Binding: Covering the Body for Binding
- What is Perfect Binding?
- Perfect Binding: Printing in Cover Blank Mode
- Perfect Binding: Printing in the Cover Print 2 in 1 Mode
- Fold: Paper Folding
- Banner: Printing on Banner Paper
- Overview of Banner Printing
- Checking the remaining amount of paper
- Mounting the Extension Tray
- Mounting the feeding extension tray
- Mounting the output extension tray (Output Tray OT-511 or Relay Unit RU-518)
- Mounting the output extension tray (Finisher FS-531 or Finisher FS-612)
- Mounting the output extension tray (Finisher FS-532 or Output Tray OT-510)
- Loading banner paper into the feeding extension tray
- Loading banner paper into Large Capacity Unit LU-202XL or Large Capacity Unit LU-202XLm
- Setting Banner Paper
- Printing on Banner Paper
- Removing the extension tray
Removing the output extension tray (Output Tray OT-511 or Relay Unit RU-518)
In order to remove the mounted Banner Tray Unit MK-740 (output extension tray), perform the reverse procedure to mounting it. For details about the mounting procedure, refer to Mounting the output extension tray (Output Tray OT-511).