Loading banner paper into Large Capacity Unit LU-202XL or Large Capacity Unit LU-202XLm

To use paper other than loaded in a tray, change the paper setting of the large capacity unit in Paper Setting on the MACHINE screen or COPY screen.

If a paper feeding failure occurs due to the paper type, paper size, or paper weight, you may improve the paper feedability by attaching the weight plates supplied with the machine to the pick-up roller unit as shown below. Change the number of weight plates to make adjustments. When loading banner paper of up to 539 mm / 21.22" in length into Large Capacity Unit LU-202XLm, attach two weight plates in advance, then change the number of weight plates to make adjustments.

  1. Open the top door (left) and top door (right).

    The tray bottom plate automatically goes down.

    NOTICE

    • Without the main body power turned on, the tray bottom plate does not move down. Be sure to turn the sub power switch ON.

    To load the same size as loaded before, proceed to step 4.

    To load a different size of paper, proceed to step 2.

  2. Adjust the positions of the side guide plate (left) and side guide plate (right).

    • supplementary explanationTurn the four side guide fixing knobs of the side guide plate (left) and the two side guide fixing knobs of the side guide plate (right) counterclockwise to loosen them.

    • supplementary explanationMove the side guide plate (left) and side guide plate (right) to match the paper size indicator provided on the top of each guide plate.

    • supplementary explanationTurn the four side guide fixing knobs of the side guide plate (left) and the two side guide fixing knobs of the side guide plate (right) clockwise to fix them.

    • supplementary explanationAdjust so that the side guide plate (left) and side guide plate (right) positions are not misaligned.

  3. Adjust the position of the rear guide plate.

    • supplementary explanationWhile pushing the rear guide lock release lever, move the rear guide plate to match the paper size indicator of the tray bottom plate.

  4. Load paper with the print side up.

  5. Press the bottom plate lowering button.

    NOTICE

    • Without the main body power turned on, the bottom plate lowering button will not function. Be sure to turn the sub power switch ON.

    • The number of loadable banner sheets is 1,000 for plain paper and 500 (128 g/m2 / 34 lb Bond) for coated paper.

  6. Load paper into the tray continuously.

    NOTICE

    • Do not load above the limit level indicated on the side guide plate (left) of the tray.

    • Be sure that the rear guide plate is securely aligned with the loaded paper. If making the space between the rear guide plate and paper too wide or too narrow, paper jams or machine trouble may be caused.

    NOTICE

    • For A4-size paper (plain paper, 80 g/m2 / 21 lb Bond), 2,500 sheets can be loaded, but for banner paper (plain paper, 128 g/m2 / 34 lb Bond), 1,000 sheets can be loaded. If too many sheets are loaded, the paper level indicator remains set to even if the top door (right) and top door (left) are closed. Reduce the amount of banner paper until the top of the stack is level with the line on the banner paper upper-limit standard label that is indicated on the side guide plate (right).

  7. Close the top door (right) and top door (left).

    The paper level indicator of the tray changes from to on the MACHINE screen and COPY screen.