Home >
Troubleshooting > If Issues Occur > Issues During Use of Controller / Application > Next Job Is Not Received When Printing Multiple Jobs, Even After Sending It to the Controller.
Next Job Is Not Received When Printing Multiple Jobs, Even After Sending It to the Controller.
Cause
Target option: Fiery color server
The settings are not configured to receive jobs during the RIP process.
Setting Procedure
Work Time: 5 mins or less
This can be resolved by changing the settings.
The following procedure shows an example for the Fiery color server.
1
Launch Command WorkStation, and select [Server], and then [Device Center].
3
Open the [Job Management].
4
Set the [RIP while Receive] check box to [ON].