Configure settings related to color setting for color conversion.
Configure settings to use tone curves, spot colors, and alternative colors.
PS Plug-in Driver
Print Manager
Print Manager (Hot Folder Setting)
Screen access
PS Plug-in Driver - [Management]
Print Manager - Select a job. - [Job Management] - [Job Settings] - [Management]
Touch panel - [CNTL] - Select a job. - [Job Management] - [Job Settings] - [Management]
Print Manager - [Configuration] - [Hot Folder Configuration...] - [Create...] - [Management]
Touch panel - [CNTL] - [Configuration] - [Hot Folder Configuration...] - [Create...] - [Management]
Setting item | Description |
---|---|
[Acquire Color Management Data] | Acquire profile information, tone curve information, and default setting information registered in the Image Controller. |
[Use Default Color Management Settings] | Use the color configuration setting for color conversion. |
[Use Manual Settings] | Manually configure the setting without using the default setting. |
[Reflect the Latest Settings]* | Select this check box to always perform re-RIP using the image controller.
|
Configure settings for RGB color conversion. | |
Configure settings for CMYK color conversion. | |
Configure settings of the printer profile. | |
Set the color conversion options. |
*: To automatically apply the Exact Color adjustment data or tone curve created by Color Centro to a hold job, select this check box. The adjustment data or tone curve are not automatically applied while this check box remains cleared. Exact Color adjustment data is applied to all the hold jobs. The tone curve is only applied to hold jobs for which the tone curve is used.