[2-Sided]

Configure settings to perform 2-sided printing.

[Imposition]

Set the imposition method to perform imposition printing.

• [2 Repeat Reversal (Left)] and [2 Repeat Reversal (Right)] can be set if [Original Orientation] is set to [Portrait].

• [2 Repeat Reversal (Top)] and [2 Repeat Reversal (Bottom)] can be set if [Original Orientation] is set to [Landscape].

• [Cut in Two] can be set when Trimmer Unit TU-510 is mounted.

[Binding Position]

[Left Bind]

Set the bind position of prints.

• If [Binding Position] is changed, the printing direction on paper can also be changed automatically.

[Right Bind]

[Top Bind]

[Imposition Quality]^*1

[Normal]

Set the imposition quality.

[High Precision]

[Page Interval]^*2

Set the interval between facing pages when imposition is selected.

• Range: -250.0 mm to 250.0 mm / -9.84" to 9.84"

• You can select [High Precision] in [Imposition Quality] to make adjustments in 0.01 mm / 0.001" increments.

[Creep Adjustment]^*3

[Page Offset]

Set the creep adjustment amount.

• Select [Page Offset] to set the offset amount for each page.

• Range of [Page Offset]: 0.00 mm to 5.00 mm / 0.00" to 0.197"

• Select [Whole Offset] to automatically set the offset amount based on the total number of pages.

• Range of [Whole Offset]: 0.0 mm to 50.0 mm / 0.00" to 1.97"

[Whole Offset]

[Booklet Cover Blank Page Insertion]^*3

Configure settings to insert a blank page to print the last page on the back cover.

• If [Booklet Cover Blank Page Insertion] is selected, [Book Spread] and [Booklet Splitting] are not selectable.

• This is displayed and available only in [Job Settings] of PS Plug-in Driver and Print Manager.

[Booklet Splitting]^*3

Set the number of pages to split a booklet.

• Range: 1 to 9,999

• If the split unit is not a multiple of 4, blank pages are inserted automatically.

• If [Booklet Splitting] is selected, [Book Spread] and [Booklet Cover Blank Page Insertion] are not selectable.

[Book Spread]^*4

Configure settings to print original data of different paper sizes in book spread.

• If [Book Spread] is selected, [Booklet Cover Blank Page Insertion] and [Booklet Splitting] are not selectable.

• Setting [Book Spread] automatically changes [Combination] to [Off].

[Poster Printing]^*5

[Off]

Configure settings to divide larger print data than the paper size into multiple sheets when printing.

• This setting is not available for a page-edited job.

[Central]

[Partial]

[Divided]

[Central Divided]

[Output Order]^*6

[Sideways from Upper Left]

Set the order to output the divided original when printing a poster as well as the width and height when pasting printed sheets.

• If [Divided] is selected in [Poster Printing], set [Output Order], [Width], or [Height].

• If [Central Divided] is selected in [Poster Printing], set [Width].

• Range of [Width]: 0.0 mm to 90.0 mm / 0.0" to 3.54"

• Range of [Height]: 0.0 mm to 90.0 mm / 0.0" to 3.54"

[Downward from Upper Left]

[Combination]^*7

Configure settings to combine a multi-page document onto a single sheet of paper.

[Original Size]

Set the size of the original.

• When [PostScript Custom Page Size] is selected in PS Plug-in Driver, the original size registered in [PostScript Custom Page Size] is used.

• You can set a custom size in [Custom Size...].

• The original size and original orientation are only displayed in [Job Settings] of Print Manager.

• You can set the original size and original orientation in [Hot Folder Configuration...] of Print Manager.

[Original Orientation]

[Portrait]

Set the orientation of the original to print.

• When setting, make sure that the original orientation matches the paper orientation.

[Landscape]

[Paper Size]

Set the paper size used for printing.

• When [PostScript Custom Page Size] is selected in PS Plug-in Driver, the paper size registered in [PostScript Custom Page Size] is used.

• If the selected paper size is larger than the original size, you can set [Image Position].

• You can set a custom size in [Custom Size...].

[Fit to Paper Size]

Configure settings to enlarge or reduce the original size to suit the paper size when the paper size is different from the original size.

[Zoom]

Set the zoom-in or zoom-out rate.

• Range: 1% to 1,000%

[Full Bleed]^*5

Configure settings to print a marginless image.

[Postcard Full Bleed]^*8

Configure settings to print a marginless image on A6 size paper.

• This function is not displayed by default. For details, contact your service representative.

[180°Rotate]

Configure settings to rotate the image 180° and make prints.