Display the optional devices mounted on this system.
Acquiring device information automatically updates the optional device mounting status on this system.
Setting item | Description | |
---|---|---|
[Acquire Device Information] | Acquires information on the optional devices mounted on this system. If information is acquired, is displayed on the right side. If information acquisition fails, is displayed. | |
[Multi Folder] | [None] | Displayed when the multi folder is not mounted on this system. |
Multi folder list | Displays the multi folders mounted on this system. | |
[Stacker] | [None] | Displayed when the stacker is not mounted on this system. |
Stacker list | Displays the stackers mounted on this system. | |
[Stapler] | [None] | Displayed when the stapler is not mounted on this system. |
Stapler list | Displays the staplers mounted on this system. | |
[Punch Kit] | [None] | Displayed when the punch kit is not mounted on this system. |
Punch kit list | Displays the punch kits mounted on this system. | |
[Saddle Unit] | This check box is selected when the stapler with the saddle unit is mounted on this system. | |
[Cover Sheet Feeder] | This check box is selected when the stapler with the cover sheet feeder is mounted on this system. | |
[Saddle-Stitcher] | [None] | Displayed when the saddle-stitcher is not mounted on this system. |
Stitcher list | Displays the saddle-stitchers mounted on this system. | |
[Crease Unit] | This check box is selected when the saddle-stitcher with the crease unit is mounted on this system. | |
[Spine Corner Forming Unit] | This check box is selected when the saddle-stitcher with the spine corner forming unit is mounted on this system. | |
[2-Side Slitting Unit] | This check box is selected when the saddle-stitcher with the 2-side slitting unit is mounted on this system. | |
[Trimmer Unit] | This check box is selected when the trimmer unit is mounted on this system. | |
[Trimmer Unit (Gutter)] | ||
[Creaser (Down Convex)] | This check box is selected when the creaser is mounted on this system. | |
[Creaser (Up Convex)] | ||
[Job Separator] | This check box is selected when the job separator is mounted on this system. | |
[Long Paper Unit] | This check box is selected when the long paper unit is mounted on this system. | |
[FD Perforation Unit] | This check box is selected when the perforation unit is mounted on this system. | |
[CD Perforation Unit] | ||
[Perfect Binder ] | This check box is selected when the perfect binder is mounted on this system. | |
[Envelope Fusing Unit] | This check box is selected when the envelope fusing unit is mounted on this system. | |
[Multi Hole Punch Unit] | [None] | Displayed when the multi hole punch unit is not mounted on this system. |
Multi hole punch unit list | Displays the multi hole punch units mounted on this system. | |
[External Finisher] | [None] | Displayed when the external finisher is not mounted on this system. |
[External Finisher (Middle of Configuration)] | Displays the external finishers mounted on this system. | |
[External Finisher (End of Configuration)] | ||
[Relay Unit] | [None] | Displayed when the relay unit is not mounted on this system. |
Relay unit list | Displays the relay units mounted on this system. | |
[Paper Source Unit] | [None] | Displayed when the paper source unit is not mounted on this system. |
Paper source unit list | Displays the paper source units mounted on this system. |