Fold Skew Adjustment
Adjust the adjustment plate insertion in Saddle Stitcher SD-513. This adjustment is available for each of 1-sheet folding or multi-sheet folding.
Objects of Adjustment: Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, PI, Custom (380 to 488 mm), Custom (257 to 379 mm), 13 19 short edge feed
NOTICE
If a numeric value is specified for Offset for All Size, it is applied to all paper sizes. With a specific paper size selected,the set value becomes the sum of the entered value and the value previously specified for Offset for All Size.
Press Adjustment on the MACHINE screen to display the Adjustment Menu screen.
Press Finisher Adjustment, Saddle Stitcher Adjustment, and Fold Skew Adjustment in sequence.
Select Single Fold or Multi Fold, then select the target size button.
Press Print Mode.
Load the paper with the size to be adjusted, then select that tray.
Press Start on the control panel.
A sample pattern will be output.
Check the skew of the folding line.
If any adjustment is required, press Exit PrintMode to return to the Fold Skew Adjustment screen.
Use the touch panel keypad to enter the set value.
supplementary explanationUse +/- to specify the value to be positive or negative.
supplementary explanationPress Set to change the Current Value.
supplementary explanationAdjustment Range: -50 (To weaken) to +50 (To strengthen) (1 step = 0.1 mm)
Repeat steps 4 to 9 until the desired result is obtained.
Press Return.
The screen returns to the Saddle Stitcher Adjustment Menu screen.