Relay Unit RU-702

Type

Relay unit with purge tray 

Function

Straight delivery

Delivers paper accelerating it according to the basic line speed determined for finishing operation.

Paper feeding for automatic inspection

Judges whether an image failure occurs while the machine is delivering paper through the paper feeding route for automatic inspection.

Purge tray output

Outputs the paper, on which an error was detected by automatic inspection, to the Purge Tray.

Paper size

Standard: SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed/long edge feed, A4 short edge feed/long edge feed, B5 short edge feed/long edge feed, A5 short edge feed/long edge feed, B6 short edge feed, A6 short edge feed, Postcard short edge feed, 13 19 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 9 11 long edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed/long edge feed, 7.25  10.5 short edge feed/long edge feed, 5.5 8.5 short edge feed/long edge feed, Foolscap*, 8K short edge feed, 16K short edge feed/long edge feed

Custom:

Straight delivery

Widthwise 95 mm to 330.2 mm, Lengthwise 139 mm to 1,300 mm / Widthwise 3.74" to 13", Lengthwise 5.47" to 51.18"

Purge tray output, Paper feeding route for automatic inspection

Widthwise 95 mm to 330.2 mm, Lengthwise 139 mm to 487.7 mm / Widthwise 3.74" to 13", Lengthwise 5.47" to 19.2"

Tab paper: A4T short edge feed/long edge feed, 8.5 11T short edge feed/long edge feed

*: Foolscap refers to 8.5 13 short edge feed, 8.25 13 short edge feed, 8.12 13.25 short edge feed, and 8 13 short edge feed.

Paper Type

Recommended paper for the machine

Paper weight

40 g/m2 to 400 g/m2 / 11 lb Bond to 106 lb Bond

Tray capacity (Purge Tray)

100 sheets (80 g/m2 / 21 lb Bond, Height 20 mm)

* The capacity of 49 g/m2 / 13 lb Bond or less is not assured.

Dimensions

410 mm (W) 787.2 mm (D) 1,135 mm (H) / 16.14" (W) 30.99" (D) 44.69" (H)

* Excluding the output tray and projections Including the duct

Weight

Approx. 85 kg / 187.40 lb

Power source

AC 100 to 240 V, 50/60 Hz (via power cord)

DC24V, 5V (supplied from the equipment connected previously to the unit)

DC24V, 5V (supplied to the post-processing machine)

Maximum power consumption

600 W or less (Including the rear unit connection option)