Menu

About This Machine

Overview of this Machine
- Major Functions of this Machine
- Application functions (Image Controller IC-605)
Basic Usage
- Turning On/Off the Power
- Managing Power Mode
- Loading Paper
- Replacing a Toner Bottle
- Positioning the Original
  - Positioning the Original in ADF
  - Positioning the Original on Original Glass
- Network Setting
- Managing this Machine
- Adjusting Response Time of Keys and Buttons
Machine Specifications
- AccurioPress C3080, AccurioPress C3070, or AccurioPrint C3070L
- AccurioPress C3080P, or AccurioPress C83hc
Option Specifications
Component Names and Functions
Major Screen Names and Functions
- About Screen
- MACHINE Screen
  - Components of the MACHINE Screen
  - Setting on the MACHINE Screen
- JOB LIST Screen
- RECALL Screen
- STORE Screen
- COPY Screen
- SCAN Screen
  - SCAN Screen
  - Scan Settings Screen
- UTILITY Screen
Option Names and Functions
Standard/Optional Equipment

Finisher FS-612 (Punch Kit PK-512 or Punch Kit PK-513)

External view of Finisher FS-612

No.	Name	Description
1	Finisher front door	Opens to allow staple supply or removal of paper jam. Also opens to allow removal of waste paper for the machine mounted with Punch Kit PK-512 or Punch Kit PK-513.
2	Fold/Staple mode tray	Holds sets output in Fold & Staple, Half Fold, or Tri-Fold mode.
3	Primary (main) tray	Holds non offset, offset, or stapled sets.
4	Secondary (sub) tray	Holds sets output in non offset mode.

Internal view of Finisher FS-612

No.	Name	Description
5	LeverFN4	Opens rightward for removal of paper jam.
6	LeverFN1	Opens leftward for removal of paper jam.
7	KnobFN3	Turned to allow removal of paper jam.
8	Punch Kit PK-512 or Punch Kit PK-513 (option)	Punches file holes in output sheets.
9	LeverFN2	Opens downward for removal of paper jam.
10	Punch kit scrap box (option)	Holds waste paper punched out.
11	Stacker unit	Stapler and the devices for folding and stapling, half-folding, and tri-folding are mounted.
12	KnobFN7	Turned to allow removal of paper jam.
13	LeverFN8	Opens leftward with the stacker unit drawn out for removal of paper jam.
14	LeverFN5	Opens lower leftward for removal of paper jam.
15	HandleFN6	Withdraws the stacker unit for removal of paper jam in the stacker unit, or for staple supply.
16	LeverFN9	Opens rightward for removal of paper jam.
17	Staple cartridge	Removed for staple supply and added with staples.
18	LeverFN10	Opens leftward for removal of paper jam.

CAUTION

DO NOT put your hand on the top of printed sheets when removing them from the primary (main) tray.

Failure to do so may cause unexpected injury, such as getting your fingers squeezed between the main body and the tray going upward. Please be sure to hold both front and rear sides of paper when removing printed sheets from the tray.