User's Guide

Home > Print Workflow > Automatically Outputting Paper When Problems Occur > Automatic Inspection Settings > Configuring Security Settings

Configuring Security Settings

Configure security settings for Auto Inspection Unit AI-101. Implement any required measures for your environment.

Configure the settings by going to Control panel - Utility/Counter - [Administrator Setting] - [Security Setting (AI-101)].

Setting item

Description

[Web Access Password Setting]

Set the Web Utilities password for Auto Inspection Unit AI-101.

[Web Access IP Filtering]

Set Web Utilities IP filtering for Auto Inspection Unit AI-101.

[TLS Setting]

Set the encryption of Auto Inspection Unit AI-101 network communications.

[Storage Encryp. Set.(AI-101)]

Set the HDD and SSD encryption function of Auto Inspection Unit AI-101.

[Delete All Data Setting]

Select [Erase Mode] to overwrite and delete the Auto Inspection Unit AI-101 HDD or SSD data or non-volatile memory data with other specific data.

[U-ROM Digital Signature Set.]

Configure the setting to enable the digital signature verification function for Auto Inspection Unit AI-101 firmware.

[Storage All Backup]

Back up data (reference images and automatic inspection reports) in the Auto Inspection Unit AI-101 HDD and SSD to a USB external storage device.

[Storage All Restore]

Select [Storage All Backup] to back up data in the Auto Inspection Unit AI-101 HDD and SSD to an external storage device, and restore the data to the Auto Inspection Unit AI-101 HDD and SSD.

For details, refer to [Security Setting (AI-101)].

NOTICE
  • If [Storage Encryp. Set.(AI-101)] is enabled when a reference image or non-created automatic inspection reports already exists, the system may not function correctly, including the system freezing when the reference image is displayed.
  • Delete any reference images or non-created automatic inspection reports when [Storage Encryp. Set.(AI-101)] is enabled.

Was this information useful?