Cleaning the Scrap Box of Multi Punch GP-501

Punch waste can fall into the multi punch, and it may have adverse effects on machine operation. Clean the multi punch on a routine basis according to the procedure below.

  1. Open the multi punch front door, and then open the lever
    [GP5].

  2. Remove the punch waste inside the unit using a vacuum cleaner.

  3. Withdraw the punch scrap box.

    NOTICE
    • Once withdrawing the punch scrap box from the multi punch, be sure to empty it. The machine resets the counter every time the punch scrap box is withdrawn, irrespective of whether or not the punch scrap box is empty.

  4. Remove punch waste inside the unit using a vacuum cleaner.

  5. Close the front door of the multi punch when you finish cleaning.