Conditions registered to Copy Mode Memory, Scan Mode Memory, or Store Mode Memory No.30
These conditions are registered by pressing Mode Memory on the control panel.
When Reset is applied, the following settings become effective.
Effective Setting | Reset Button Function* | Mode Memory Auto Call* | Whether or not data exists in Copy Mode Memory, Scan Mode Memory, or Store Mode Memory No. 30 |
Full Auto | Full Auto | ― | ― |
Initialize | Initialize | ON | NO |
OFF | ― | ||
Copy Mode Memory, Scan Mode Memory, or Store Mode Memory No. 30 | Initialize | ON | YES |
*: Within UTILITY - User Setting - System Setting - Reset Setting - Job Reset Setting
Conditions common to the arbitrary settings
The following conditions function in common, irrespective of the selection made from Full Auto, Initialize, and conditions registered to Copy Mode Memory, Scan Mode Memory, or Store Mode Memory No. 30.
Change User: ON, OFF
ADF Original Direction: Reset, Not Reset
Initial by KeyCounter Insert: ON, OFF
Status Hold When Auto Reset: Not Keep, Keep
Next Job Staple Setting: Release, Do Not Release
Original Set/Bind Direction: Release, Do Not Release
Reference
For details about copy, scan, or store conditions in Initialize, refer to [Copy Initial Setting], [Scan Initial Setting], or [Store Initial Setting].
For details about the conditions common in arbitrary settings, refer to [Job Reset Setting].
For details about how to register mode memory, refer to Registering copy settings in the program, Registering Scan Settings in Program, or Mode Memory: Registering Store Settings.