Setting the Auto Tray Switch (ATS) means printing does not need to stop when a paper tray runs out of paper, helping prevent drops in productivity.
The setting procedure is detailed below.
[Simple Setting] is a function to automatically set various items of [Expert Adj.] that corresponds to the symptomatic improvement by just selecting the preset table applicable to the symptoms such as abnormality or trouble.
Specific adjustments can be made to the following items.
Paper jam
Improving cloudy images and image blur on prints
Example of [Simple Setting] Adjustment Items
Adjustment Item | Target Tools | Description |
---|---|---|
[Transfer-Fuser JAM(1st)] | Touch panel | This function is effective for paper jams that may occur when you print the front side of thin paper. |
[Cloudy Image(1st)] | Touch panel | This function is effective for cloudy image and image blur on the whole image printed on the front side. |
Adjusting the [Expert Adj.] items allows you to deal with various situations or finishing conditions.
The following features are available as adjustment items.
Improving errors that occur during the transfer, separation, and fusing processes
Other advanced adjustments