[PDL]

[Auto]

Automatically sets PDL.

[PCL]

Select PDL.

[PS]

[TIFF]

[PPML]

[JPEG]

[Paper Tray]

[Auto]

Automatically selects the appropriate paper tray depending on the paper size of the print job.

Paper tray selection list

Selects the paper tray.

[Output Tray]

[Default]

Automatically selects the appropriate output tray depending on the print job.

Output tray selection list

Selects an output tray.

[Simplex/Duplex]

[Duplex]

Sets to 2-sided printing.

[Simplex]

Sets to 1-sided printing.

[Bind Direction]

[Top]

Select the bind direction.

[Left]

[Right]

[Staple]

[OFF]

Does not staple.

[Left Corner]

Staples in the left corner of the paper.

[Right Corner]

Staples in the right corner of the paper.

[2 Positions (Wide)]

Adjusts the 2-position staple interval to approximately 165 mm.

[2 Positions (Narrow+)]

Adjusts the 2-position staple interval to approximately 140 mm.

[2 Positions (Narrow)]

Adjusts the 2-position staple interval to approximately 120 mm.

[Punch]

[OFF]

Does not punch.

[2-Hole]

Sets the number of punch holes.

Performs punching to suit the setting of [Bind Direction].

[3-Hole]

[4-Hole]

[Multi Punch]

[Double Multi Punch]

[Fold]

[OFF]

Does not perform paper folding.

Finishing method selection list

Select the desired fold type.

[Offset]

[ON]

Offsets to output paper.

[OFF]

Does not offset to output paper.

[Face]

[Face up]

Outputs prints with their print side up.

[Face down]

Outputs prints with their print side down.

[Order]

[1 to N]

Outputs prints in page order.

[N to 1]

Outputs prints in the reverse order of the page order.

[Number of Sets]

Used to enter numeric values.

Range: 1 to 9999 copies

[Sort/Group]

[Sort]

Sequentially prints the specified number of sets in the same page order as the original.

[Group]

Prints the specified number of sets of each page of the original, and outputs them in the original order.

[Default Paper Size]

Selects the paper size.

[Orientation]

[Portrait]

Select the paper orientation.

[Landscape]

[Banner Option]

[ON]

Does not print a banner page.

[OFF]

Prints a banner page.

[Banner Tray]

[Auto]

Automatically selects a paper tray.

Paper tray selection list

Selects the paper tray.

[Convert Paper Size]

[OFF]

Does not change the paper size.

[8.5e11/11e17 to A4/A3]

Changes 8.5 e 11 to A4 and 11 e 17 to A3 when printing.

[A4/A3 to 8.5e11/11e17]

Changes A4 to 8.5 e 11 and A3 to 11 e 17 when printing.

[Combine Originals/Image Repeat]

[OFF]

Does not perform combine or repeat printing.

[2-in-1]

Prints 2 original images on a single sheet.

[2 Repeat]

Repeats the original image twice.

[2 Repeat/L-Reverse]

Repeats a part of the original image twice, and flips one of the repeated images to the left.

[2 Repeat/R-Reverse]

Repeats a part of the original image twice, and flips one of the repeated images to the right.

[2 Repeat/U-Reverse]

Repeats a part of the original image twice, and flips one of the repeated images upward.

[2 Repeat/D-Reverse]

Repeats a part of the original image twice, and flips one of the repeated images downward.

[4in1/Vertical]

Prints 4 original images on a single sheet in vertical order.

[4in1/Horizontal]

Prints 4 original images on a single sheet in horizontal order.

[4 Repeat]

Repeats the original image 4 times.

[8 Repeat]

Repeats the original image 8 times.

[Booklet]

[ON]

Sets to booklet.

[OFF]

Does not set to booklet.

[Adhesive Binding]

[ON]

Sets the imposition with adhesive binding to the default.

[OFF]

Does not perform imposition with adhesive binding.

[Image Position]

[Lead Edge]

Selects the image position.

[Center]

[Rear Edge]

[Pile Permission]

[ON]

Piles up the next job's prints in the stacker.

[OFF]

The next job cannot be printed until the current job is removed from the stacker.

[180 Deg. Rotate]

[ON]

Rotates the original by 180 degrees to make prints.

[OFF]

Does not rotate the original by 180 degrees to make prints.

[Resolution]

[600e600 dpi]

Selects the resolution (dpi).

[1200e1200 dpi]

[Full Bleed]

[ON]

Performs Full Bleed.

[OFF]

Does not perform Full Bleed.

[Paper Feed Direction]

[Auto]

Automatically sets the feed direction to suit the original or paper.

[LEF]

Sets the feed direction to the horizontal direction.

[SEF]

Sets the feed direction to the vertical direction.

[Switch Over 9e11 / 8 1/2e11Tab]

[9e11]

Switches to the 9 e 11 tab for printing.

[8 1/2e11 Long Edge Tab]

Switches to the 8 1/2 e 11 tab for printing.

[Crease]

[ON]

Creases paper.

[OFF]

Does not crease paper.

[Setting]

[ON]

Forms the spine corner.

[OFF]

Does not form the spine corner.

[Wait]

[ON]

Stores a print job as a reserved job.

[OFF]

Does not store a print job as a reserved job.

[External Finisher(middle of configuration)]

[ON]

Uses the external finisher to mount in the middle stage.

[OFF]

Does not use the external finisher.

[External Finisher(end of configuration)]

[ON]

Uses the external finisher to mount at the end.

[OFF]

Does not use the external finisher.

[Auto Image Adjustment]

[Off]

Does not perform automatic image adjustment.

[Position & Gradation]

Performs automatic image adjustment for the position and gradation.

[Position]

Performs automatic image adjustment for the position.