[JSP Setting]
Overview
Configure the default setting to communicate with a Java application such as Print Manager.
Tips
- If you have changed the setting, turn the machine off and back on again.
Setting Items
Setting item | Description | |
|---|---|---|
[JSP Setting] | [Disable] | Disables JSP. |
[Enable(With Password)] | Does not use SSDP. | |
[Enable(Without Password)] | Enables JSP without authentication. | |
[Port Number] | Sets the port number used to communicate with a Java application. Range: 30081 to 30090 | |
[Use SSL/TLS] | [Non-SSL Only] | Allows communication only in the case SSL communication settings are disabled. |
[SSL Only] | Allows communication only in the case SSL communication settings are enabled. To enter [Port No.(SSL/TLS)], select this item. | |
[SSL/Non-SSL] | Allows communication when SSL communication settings are enabled and disabled. To enter [Port No.(SSL/TLS)], select this item. | |
[Port No.(SSL/TLS)] | Enter the port number used for SSL enabled communication with a Java application. Range: 30081 to 30090 | |
[User ID] | Sets user ID when using authentication. Up to 8 single-byte characters can be entered. | |
[Password] | Sets password when using authentication. Up to 8 single-byte characters can be entered. To change the password, select the [Password is changed.] check box. | |
in the upper-right of a page, it turns into 
and is registered as a bookmark.