Configure the setting to send emails from the Image Controller.
Setting item | Description | |
---|---|---|
[E-mail TX Setting] | [ON] | Sends emails from the Image Controller. |
[OFF] | Does not send emails from the Image Controller. | |
[SMTP Server Address] | Sets the SMTP server address. To enter the host name, select the [Please check to enter host name.] check box. | |
[Use SSL/TLS] | [OFF] | Does not use SSL and TLS. To enter [Port Number], select this item. |
[SMTP over SSL] | Uses SSL. To enter [Port Number (SSL)], select this item. | |
[Start TLS] | Uses TLS. To enter [Port Number], select this item. | |
[Port Number] | Enter the port number of the SMTP server. Range: 1 to 65535 | |
[Port Number (SSL)] | Enter the port number for SSL communication via the SMTP server. Range: 1 to 65535 | |
[Certificate Verification Level Settings] | ||
[Validity Period] | [Confirm] | Checks whether the certificate's expiration date is valid. |
[Do Not Confirm] | Does not check whether the certificate's expiration date is valid. | |
[CN] | [Confirm] | Checks whether the CN (Common Name) of the certificate matches the server address. |
[Do Not Confirm] | Does not check whether the CN (Common Name) of the certificate matches the server address. | |
[Key Usage] | [Confirm] | Checks whether the certificate is used according to the intended usage approved by the issuer of the certificate. |
[Do Not Confirm] | Does not check whether the certificate is being used according to the usage approved by the issuer of the certificate. | |
[Chain] | [Confirm] | Checks whether there are any problems in the certificate chain (certificate path). To confirm the chain, refer to the external certificate managed in the Image Controller. |
[Do Not Confirm] | Does not check whether there are any problems in the certificate chain (certificate path). | |
[Expiration Date Confirmation] | [Confirm] | Checks whether the certificate has expired. |
[Do Not Confirm] | Does not check whether the certificate is lost. | |
[Connection Timeout] | Sets the time required to interrupt a connection. Select from the menu list. Range: [30] to [300] | |
[Max Mail Size] | [Limit] | Limits the maximum email size. To set [Server Capacity], select this item. |
[No Limit] | Does not limit the maximum email size. | |
[Server Capacity] | Sets the maximum email size that is available for the SMTP server. Range: 0 Mbyte to 100 Mbyte | |
[POP before SMTP] | [ON] | Uses the POP before SMTP authentication. To set [POP before SMTP Time], select this item. |
[OFF] | Does not use the POP before SMTP authentication. | |
[POP before SMTP Time] | Sets the time required to use the POP before SMTP authentication. Range: 0 sec. to 60 sec. | |
[SMTP Authentication] | [Enable] | Uses SMTP authentication. To set [User ID], [Password], or [realm], select this item. |
[Disable] | Does not use SMTP authentication. | |
[User ID] | Enter the user ID to use SMTP authentication. | |
[Password] | Sets the password to use SMTP authentication. To change the password, select the [Password is changed.] check box. | |
[realm] | Sets the area to use SMTP authentication. | |
[Binary Division] | Performs binary division for email. To set [Divided Mail Size], select this check box. | |
[Divided Mail Size] | Enter the size to divide an email. Range: 100 Kbyte to 15000 Kbyte |