[Marks]
Overview
Configure settings to attach a line (corner crop mark) for trimming to the finishing size or a line (center crop mark) indicating the center of the top and bottom of prints to image data.
The settings are displayed in [Preview].
Tips
- If [Crop Mark] is attached, [Trim Line] cannot be set.
Setting Items
Setting item | Description | |
|---|---|---|
[Crop Mark] | [Off] | Set the type of a crop mark to attach to original data.
|
[Corner] | ||
[Center] | ||
[Corner/Center] | ||
[Setting for Imposition]*1 | [Per Page ] | Set the method to print a corner crop mark for imposition. |
[Per Sheet ] | ||
[Only on Front Side]*2 | For 2-sided printing, configure settings to attach a crop mark and trim line to the front side only. | |
[Corner Crop Mark Type] | [Type 1]  | Set the type (shape) of corner crop mark to attach to original data. |
[Type 2]  | ||
[Type 3]  | ||
[Trim Margin]*3 | Set the trim margin width of a crop mark.
| |
[Horizontal Shift]*3 | Set the horizontal position of a crop mark.
| |
[Vertical Shift]*3 | Set the vertical position of a crop mark.
| |
*1: The following settings are required to use this function.
Set [Imposition] of [Layout] to an option other than [Off].
Set [Crop Mark] to [Corner] or [Corner/Center].
*2: The following settings are required to use this function.
In [Layout], set [2-Sided] to On.
Set [Crop Mark] to a setting other than [Off].
*3: The following setting is required to use this function.
Set [Crop Mark] to [Corner] or [Corner/Center].
in the upper-right of a page, it turns into 
and is registered as a bookmark.