User's Guide

Home > PS Plug-in Driver > PS Plug-in Driver > [Fold] > Crease

Crease

Overview
Setting Items
Crease Position

Overview

Crease the copied paper to make it easier to fold.

This function prevents toner peeling that occurs when paper is folded.

NOTICE

The following options are required to use this function.

  • Saddle Stitcher SD-513 with Creaser Unit CR-101 mounted
Tips
  • The available crease positions vary depending on the paper length (length of the long side).

Setting Items

Setting item

Description

[Number of Crease]

[Off]

Does not crease.

[1 Piece] to [4 Pieces]

Set the number of creases attached on paper.

[Crease Side]*

[Front]

Set the side to crease paper.

  • Setting to [Front] automatically changes [Output Order] to [Face Up].

  • Setting to [Back] automatically changes [Output Order] to [N to 1].

  • Setting [Fold] to [Multi Tri-Fold] or a setting other than that automatically sets [Back] or [Front] respectively.

[Back]

[Crease Position]

[(1)] to [(4)]

Set the position to crease paper.

  • The available crease positions vary depending on the paper length (length of the long side) and [Number of Crease].

  • For details about the paper length and crease positions, refer to Crease Position.

*: The following settings are required to use this function.

  • Set [Number of Crease] to an option other than [Off].

  • Set [Fold] to [Off].

Crease Position

Paper length La: 240 mm / 9.44" to 336 mm / 13.22"

Paper length Lb: 337 mm / 13.26" to 488 mm / 19.21"

Creasing position

Range

Range

[(1)]

7.0 mm to 290.0 mm / 0.27" to 11.41"

[(2)]

8.0 mm to 290.0 mm / 0.31" to 11.41"

[(3)]

9.0 mm to 290.0 mm / 0.35" to 11.41"

[(4)]

10.0 mm to 290.0 mm / 0.39" to 11.41"

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by title

Filter by title

You can narrow the search range from the menu for this user's guide.
Multiple choices are possible.