Paper Size Available for Use
Paper trays | Available sizes | |
|---|---|---|
Paper Feeder Unit PF-707 | Standard: SRA3 Custom: Widthwise 100 mm*2 to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.94" to 13", Lengthwise 5.5" to 19.2" Tab paper: A4T Detectable standard sizes can be switched as follows. *3 •(A5 •(SRA4 •8.5 JIS standard sizes for B series, and also to use •B5 | |
Paper Feeder Unit PF-708 | Standard: SRA3 Custom: Widthwise 100 mm to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.94" to 13", Lengthwise 5.5" to 19.2" Tab paper: A4T Detectable standard sizes can be switched as follows. *3 •(A5 •(SRA4 •8.5 JIS standard sizes for B series, and also to use •B5 | |
Cover tray of Perfect Binder PB-503 | Length (head to foot): Same as that of body set Width: Book width Available size: Widthwise 139.7 mm to 307 mm, Lengthwise 279 mm to 472 mm / Widthwise 5.5" to 12.09", Lengthwise 10.98" to 18.58" | |
Post inserter (equipped in Folding Unit FD-503 as standard) | Standard: SRA3 Custom: Widthwise 182 mm to 331 mm, Lengthwise 139 mm to 483 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 19.02" Tab paper: A4T Detectable standard sizes can be switched as follows. *3 •A5 •SRA4 •SRA3 •8.5 The 4th option above mentioned changes as follows when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •(B4 Cover for Perfect Binding*6: Widthwise 182 mm to 307 mm, Lengthwise 279 mm to 483 mm / Widthwise 7.17" to 12.09", Lengthwise 10.98" to 19.02" | |
Post Inserter PI-502 (equipped in Finisher FS-532 as option) | Upper tray | Standard: A4 Custom: Widthwise 182 mm to 216 mm, Lengthwise 139 mm to 297 mm / Widthwise 7.17" to 8.5", Lengthwise 5.47" to 11.69" Detectable standard sizes can be switched as follows. *3 •A5 •A4 •8.5 The 3rd option above mentioned changes as follows when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •16K |
Lower tray | Standard: A3 Custom: Widthwise 182 mm to 330 mm, Lengthwise 139 mm to 482 mm / Widthwise 7.17" to 13.00", Lengthwise 5.47" to 18.98" Detectable standard sizes can be switched as follows. *3 •A5 •(SRA4 •A3 •SRA3 •8.5 The 5th option above mentioned changes as follows when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •(B4 | |
*1: B series is set to JIS or ISO standard sizes as the default setting. This setting varies depending on shipping regions. For JIS/ISO switching, contact your service representative.
*2: This size is applicable only to the 1st unit. The minimum size for the 2nd and 3rd units is 139.7 mm / 5.5".
*3: For details about how to switch [Detect Size Setting], refer to Paper Setting: Setting Paper for Tray.
*4: Foolscap refers to 8 
13 
, 8.12 13.2 , 8.25 13 , and 8.5 13 .
*5: Selection of K sizes can be enabled in the Administrator Setting provided on the [UTILITY] screen. For details, refer to K Size: Selecting Whether or Not to Use K Size Paper.
*6: Loading perfect binding cover paper requires the same setting as made for custom sizes loaded in the paper feeder unit. Standard sizes, and tab paper sizes are unavailable.
Equipment | Available sizes | |
|---|---|---|
ADU | Unlimited | |
Relay Unit RU-511 | Standard: SRA3 Custom: Widthwise 100 mm to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 5.50" to 19.20" Tab paper (only with the tab side ahead in output direction) | |
Finisher FS-532 | Secondary (sub) tray | Standard: A3 Custom: Widthwise 100 mm to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 5.50" to 19.20" Tab paper (only with the tab side ahead in output direction) |
Primary (main) tray (non-Staple) | Standard: A3 Custom: Widthwise 100 mm to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 5.50" to 19.20" Tab paper (only with the tab side ahead in output direction) Straight only: 13 | |
Primary (main) tray (Staple) | Standard: SRA3 Custom: Widthwise 203 mm to 330.2 mm*, Lengthwise 139.7 mm to 487.7 mm / Widthwise 7.99" to 13.00"*, Lengthwise 5.50" to 19.20" Tab paper (only with the tab side ahead in output direction) *: Max. 320 mm / 12.60" for parallel staple at the rear corner | |
Punch Kit PK-522 mounted | •2 holes Standard: A3 Tab Paper •3 holes Standard: A3 Tab Paper •4 holes Standard: A3 Tab Paper | |
Saddle Stitcher SD-510 mounted | •Fold & Staple Standard: A3 Custom: Widthwise 120 mm to 330.2 mm, Lengthwise 240 mm to 487.7 mm / Widthwise 4.72" to 13.00", Lengthwise 9.45" to 19.20" •Multi Half-Fold Standard: A3 Custom: Widthwise 120 mm to 330.2 mm, Lengthwise 240 mm to 487.7 mm / Widthwise 4.72" to 13.00", Lengthwise 9.45" to 19.20" •Multi Tri-Fold A4 | |
Folding Unit FD-503 | Fold mode tray/Fold | Standard: A3 Custom: Widthwise 210 mm to 305 mm, Lengthwise 279 mm to 458 mm / Widthwise 8.27" to 12.01", Lengthwise 10.98" to 18.03" |
Primary (main) tray (non-Staple) | Standard: A3 Custom: Widthwise 100 mm to 330.2 mm, Lengthwise 139.7 mm to 483 mm / Widthwise 3.94" to 13.00", Lengthwise 5.50" to 19.02" Tab paper (only with the tab side ahead in output direction) | |
Punch (2 holes) | Standard: A3 | |
Punch (3 holes) | Standard: A3 | |
Punch (4 holes) | Standard: A3 Tab Paper | |
Large Capacity Stacker LS-506 | Stacker tray | Standard: A3 Custom: Widthwise 210 mm to 330.2 mm, Lengthwise 148 mm to 487.7 mm / Widthwise 8.27" to 13.00", Lengthwise 5.83" to 19.20" Tab paper (1 to 15 tabs*) (However, output sets cannot be offset when including tab paper.) *4 tabs and 10 tabs are unavailable. |
Secondary (sub) tray | Standard: A3 Custom: Widthwise 100 mm to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 5.50" to 19.20" Tab paper (only with the tab side ahead in output direction) | |
Saddle Stitcher SD-506 | Secondary (sub) tray | Standard: A3 Custom: Widthwise 100 mm to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 5.50" to 19.20" Tab paper (only with the tab side ahead in output direction) |
Fold & Staple/Trimming | Standard: A3 Custom: Widthwise 182 mm to 324 mm, Lengthwise 257 mm to 463 mm / Widthwise 7.17" to 12.76", Lengthwise 10.12" to 18.23" | |
Multi-Fold | Multi Half-Fold: A3 Custom: Widthwise 182 mm to 324 mm, Lengthwise 257 mm to 463 mm / Widthwise 7.17" to 12.76", Lengthwise 10.12" to 18.23" Multi Tri-Fold: A4 | |
Perfect Binder PB-503 | Secondary (sub) tray | Standard: A3 Custom: Widthwise 100 mm to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 5.50" to 19.20" Tab paper (only with the tab side ahead in output direction) |
Perfect binder tray |
Standard: A4 Custom: Widthwise 139 mm to 210 mm, Lengthwise 307 mm to 221 mm / Widthwise 5.47" to 8.27", Lengthwise 12.09" to 8.7"
Widthwise 139 mm to 307 mm, Lengthwise 279 mm to 472 mm / Widthwise 5.47" to 12.09", Lengthwise 10.98" to 18.58" For details about paper sizes used in perfect binding, refer to Using Perfect Binder PB-503. | |
Relay Unit RU-510 | Standard: SRA3 Tab Paper Custom: Widthwise 100 mm to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 5.50" to 19.20" | |
Multi Puncher GP-501 | Punch: 8.5 Bypass: Widthwise 100 mm to 330.2 mm, Lengthwise 148 mm to 487.7 mm / Widthwise 3.94" to 13", Lengthwise 5.83" to 19.2" | |
Auto Ring Binder GP-502 | Standard: 8.5 Tab Paper: 8.5 Bypass: Widthwise 100 mm to 330.2 mm, Lengthwise 148 mm to 487.7 mm / Widthwise 3.94" to 13", Lengthwise 5.83" to 19.2" | |