Configuring the Default Settings of the Fax Driver
Configuring the optional environment of this machine
If you are using this machine for the first time, ensure that optional device installation and authentication settings have been correctly reflected on the fax driver.
1
Open the [Printer properties] screen of the fax driver.
For information on how to display the [Printer properties] screen, refer to How to display the [Printer properties] screen.
2
Open the [Configure] tab, and check the optional device installation and authentication settings on this machine.
Because the [Auto] of [Obtain Settings...] by default, the current information of this machine is obtained automatically and reflected on the [Device Option].
If the [Auto] of [Obtain Settings...] is disabled and if you click [Obtain Device Information], the current information of this machine is obtained and reflected on the [Device Option].
If communication with this machine fails, set the [Device Option] manually. Select an item to change from the list, and set a value in the [Setting].
3
Click [OK].
Changing the default print settings
You can change the default print settings of the fax driver if necessary.
For example, if you set to send the initial value with page combination, you can reduce the number of pages printed at the destination. We recommend that you change the default settings to suit your environment.
1
Open the [Printing Preferences] screen of the fax driver.
For information on how to display the [Printing Preferences] screen, refer to How to display the [Printing Preferences] screen.
2
Change the print settings.
Your changes apply to the PC-Fax TX in all application software.
3
Click [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.