Setting the Real-time Scan
Enabling the real-time scan
Configure settings to execute virus scanning when this machine sends or receives data. Virus scanning is executed when print data or E-mails are received, when data is read from a USB flash drive, and when data is written to a User Box.
Select [Security] - [Virus scan settings] - [Real-time scan] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and set [Realtime scan] to ON (default: OFF).
Tips
- If a virus is detected by the virus scan function, a warning message will remain displayed on the [Information] screen. When you confirm the virus detection history in Administrator Settings, the warning message is cleared. For details on how to confirm the virus detection history, refer to Viewing the virus detection history.
Setting the job restriction level when a virus is detected
If a virus is detected by real-time scanning, the jobs that can be executed on this machine are restricted.
You can set the job restriction level in advance at this time.
Select [Security] - [Virus scan settings] - [Real-time scan] - [Job control when virus is detected] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and set the level (default: [Level 1: Delete transmission jobs only.]).
For information on the jobs that are targeted for restrictions by level, refer to the table below.
Setting | Description |
|---|---|
Level 1 | At level 1, only the following sending jobs are discarded.
|
Level 2 | At level 2, the following jobs are discarded in addition to jobs at level 1. Only the FAX RX or E-mail RX job is continued.
|
Level 3 | At level 3, the following jobs are discarded in addition to jobs at level 2.
|
in the upper-right of a page, it turns into 
and is registered as a bookmark.