Multi-Network Connection Setting
Enabling the connection to multiple networks
You can connect this machine to multiple networks by setting VLAN to the wired network interface of this machine.
Select [Network] - [VLAN Settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure settings to connect to multiple networks. For details, refer to [VLAN Settings].
Configuring the administrator setting for each network
To connect this machine to multiple networks, the network setting and authentication setting of this machine must be configured for each network.
Follow the steps below to specify the target network.
1
Access Web Connection from the computer connected to network 1, and log in to the machine in administrator mode.
2
Click the network 1 icon, and select the target network.
Tips
- You cannot access Web Connection from the computer connected to network 2.
- To specify the target network on the Control Panel, select network 1 or network 2 in [Utility] - [Administrator].
Setting the network selection screen
Select [System Settings] - [Network Selection Settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and set the network selection screen when the user logs in. For details, refer to [Network Selection Settings].
in the upper-right of a page, it turns into 
and is registered as a bookmark.