Home >
Advanced Function > Installing IC Card Authentication > Using Data Administrator (for the administrator) > Registering User Authentication Information
To register user authentication information with Data Administrator, connect the IC Card Authentication Unit to the USB port of the computer, and also connect the computer to this machine via network.
1
Turn on the Main Power Switch of this machine.
2
Start Data Administrator, and import device information of this machine.
Restart the procedure five or more seconds after connecting the IC Card Authentication Unit.
For details about how to import device information, refer to the relevant Data Administrator manual.
3
In [Function selection], select [Authentication settings] - [User authentication settings], and then click [Add].
4
Select a user template, and click [OK].
5
Enter the user name and password, and select the [IC card / NFC authentication] tab or [IC card authentication] tab.
6
Place the IC card on the IC Card Authentication Unit, then click [Start reading].
If necessary, click [Card ID Input] to register the card ID.
To use an Android terminal, cancel its sleep mode, unlock the screen, then place it on the IC Card Authentication Unit.
7
Click [OK], and register authentication information of the next user.
8
After the registration of authentication information has been completed for all users, click [Export to the device].
10
When writing to this machine has finished, click [OK].
11
Disconnect the IC Card Authentication Unit from the USB port of the computer.
- When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be damaged or a failure may occur.
12
Connect the IC Card Authentication Unit to the USB Port of this machine.
- When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be damaged or a failure may occur.
13
Restart this machine.
- When restarting this machine, turn the Main Power Switch off and on again after 10 or more seconds have passed. Not doing so may result in an operation failure.
14
Perform authentication on this machine, and check that login is possible.