[Port Number]

Sets the port number of the Image Controller that communicates via OpenAPI.

Range: 1 to 65535

[Use SSL/TLS]

[Non-SSL Only]

Sets SSL/TLS encryption communication.

This function is displayed when the certificate is installed.

[SSL Only] is not selectable when the middle server authentication or a combination of the external server authentication and middle server authentication are used as the authentication method.

[SSL Only]

[SSL/Non-SSL]

[Port No.(SSL)]

Enter the port number (SSL) of the proxy server.

Range: 1 to 65535

[Proxy Settings]

[Proxy Server Address]

Sets the proxy server address.

To enter the host name, select the [Please check to enter host name.] check box.

[Proxy Server Port Number]

Enter the port number of the proxy server.

Range: 1 to 65535

[Proxy Server Port Number (HTTPS)]

Enter the port number (HTTPS) of the proxy server.

Range: 1 to 65535

[Proxy Server Port Number (FTP)]

Enter the port number (FTP) of the proxy server.

Range: 1 to 65535

[User Name]

Sets the user name to log in to the proxy server.

[Password]

Sets the password to log in to the proxy server.

To change the password, select the [Password is changed.] check box.

[Certificate Verification Level Settings]

[Client Certificates]

[Request]

Requests the certificate to the client connected to the Image Controller.

[Do not request]

Does not request the certificate to each client connected to the Image Controller.

[Validity Period]

[Confirm]

Checks whether the certificate's expiration date is valid.

[Do Not Confirm]

Does not check whether the certificate's expiration date is valid.

[CN]

[Confirm]

Checks whether the CN (Common Name) of the certificate matches the server address.

[Do Not Confirm]

Does not check whether the CN (Common Name) of the certificate matches the server address.

[Key Usage]

[Confirm]

Checks whether the certificate is used according to the intended usage approved by the issuer of the certificate.

[Do Not Confirm]

Does not check whether the certificate is being used according to the usage approved by the issuer of the certificate.

[Chain]

[Confirm]

Checks whether there are any problems in the certificate chain (certificate path). To confirm the chain, refer to the external certificate managed in the Image Controller.

[Do Not Confirm]

Does not check whether there are any problems in the certificate chain (certificate path).

[Expiration Date Confirmation]

[Confirm]

Checks whether the certificate has expired.

[Do Not Confirm]

Does not check whether the certificate is lost.