Set the IP filtering for TCP/IP.
Setting item | Description | |
---|---|---|
[Permit Access] | [Enable] | Enables [Permit Access]. |
[Disable] | Disables [Permit Access]. | |
[Set1] to [Set5] | Enter the IP address range to allow a connection with the Image Controller. This setting is available when [Enable] is selected in [Permit Access]. | |
[Deny Access] | [Enable] | Enables [Deny Access]. |
[Disable] | Disables [Deny Access]. | |
[Set1] to [Set5] | Enter the range of IP addresses that reject a connection with the Image Controller. This setting is available when [Enable] is selected in [Deny Access]. |