Use the remote diagnostic system to set whether the administrator allows the customer engineer to operate the remote panel.
Set the following items as needed.
Use the remote diagnostic system to set whether the administrator allows the customer engineer to operate the remote panel.
Setting item | Description | |
---|---|---|
[Client Setting] | [ON] | Allows the customer engineer to operate the remote panel. |
[OFF] | Prohibits the customer engineer from carrying out remote panel operation. | |
[Server Address] | Sets the server address. To enter the host name, select the [Please check to enter host name.] check box. | |
[Port Number] | Sets the port number. Range: 1 to 65535 | |
[Connection Timeout] | Sets the time required to interrupt a connection. Range: 20 sec. to 300 sec. | |
[Certificate Verification Level Settings] | ||
[Validity Period] | [Confirm] | Checks whether the certificate's expiration date is valid. |
[Do Not Confirm] | Does not check whether the certificate's expiration date is valid. | |
[CN] | [Confirm] | Checks whether the CN (Common Name) of the certificate matches the server address. |
[Do Not Confirm] | Does not check whether the CN (Common Name) of the certificate matches the server address. | |
[Key Usage] | [Confirm] | Checks whether the certificate is used according to the intended usage approved by the issuer of the certificate. |
[Do Not Confirm] | Does not check whether the certificate is being used according to the usage approved by the issuer of the certificate. | |
[Chain] | [Confirm] | Checks whether there are any problems in the certificate chain (certificate path). To confirm the chain, refer to the external certificate managed in the system. |
[Do Not Confirm] | Does not check whether there are any problems in the certificate chain (certificate path). | |
[Expiration Date Confirmation] | [Confirm] | Checks whether the certificate has expired. |
[Do Not Confirm] | Does not check whether the certificate is lost. | |
[Synchronize WebDAV Client Setting] | [ON] | Synchronizes with the WebDAV client setting. |
[OFF] | Does not synchronize with the WebDAV client setting. When selecting this option, set the [Proxy Settings] described later. | |
[Proxy Settings] | ||
[Proxy Server Address] | Sets the proxy server address. To enter the host name, select the [Please check to enter host name.] check box. | |
[Proxy Server Port Number] | Enter the port number of the proxy server. Range: 1 to 65535 | |
[User Name] | Sets the user name of the proxy server that communicates with this system when performing WebDAV transmission. Up to 63 single-byte characters can be entered. | |
[Password] | Sets proxy server password that communicates with system when sending via WebDAV. To change the password, select the [Password is changed.] check box. | |
[Launch Remote Panel from vCare] | [Allow] | Allows the customer engineer to start the remote panel. |
[Restrict] | Prohibits the customer engineer to start the remote panel. |