Configure the setting to perform printing or scanning with the Web service using the discovery proxy service.
In general use, to print data from this system using the Web service, a computer must be connected to a location that enables multicast communications from this system. In this case, install the discovery proxy server in a location that enables unicast communications from this system; you can print data from this system.
Setting item | Description | |
---|---|---|
[Enable Proxy] | [ON] | Uses a proxy server. |
[OFF] | Does not use a proxy server. | |
[Proxy1] to [Proxy3] | Select each check box to set a proxy server in the following setting items. The setting method is the same for each proxy server. | |
[Proxy Server Address] | Sets the proxy server address. To enter the host name, select the [Please check to enter host name.] check box. | |
[File Path] | Sets the file path of the proxy server. Up to 255 single-byte characters can be entered. | |
[Enable SSL] | [ON] | Uses SSL. |
[OFF] | Does not use SSL. | |
[Proxy Server Port Number] | Enter the port number of the proxy server. Range: 1 to 65535 |