[WebDAV TX Setting]

[ON]

Uses WebDAV sending function.

[OFF]

Does not use WebDAV sending function.

[Proxy Settings]

[Proxy Server Address]

Sets the proxy server address.

To enter the host name, select the [Please check to enter host name.] check box.

[Proxy Server Port Number]

Enter the port number of the proxy server.

Range: 1 to 65535

[User Name]

Sets the user name of the proxy server that communicates with this system when performing WebDAV transmission.

Up to 63 single-byte characters can be entered.

[Password]

Sets proxy server password that communicates with system when sending via WebDAV.

Up to 63 single-byte characters can be entered.

To change the password, select the [Password is changed.] check box.

[Chunk Transmission]

[ON]

Performs chunk transmission.

[OFF]

Does not send in chunk.

[Connection Timeout]

Sets the time required to interrupt a connection.

Range: 5 sec. to 300 sec.

[Server Authentication Character Code]

[UTF-8]

Selects the desired authentication character code.

[Windows Code Page]

[Certificate Verification Level Settings]

[Validity Period]

[Confirm]

Checks whether the certificate's expiration date is valid.

[Do Not Confirm]

Does not check whether the certificate's expiration date is valid.

[CN]

[Confirm]

Checks whether the CN (Common Name) of the certificate matches the server address.

[Do Not Confirm]

Does not check whether the CN (Common Name) of the certificate matches the server address.

[Key Usage]

[Confirm]

Checks whether the certificate is used according to the intended usage approved by the issuer of the certificate.

[Do Not Confirm]

Does not check whether the certificate is being used according to the usage approved by the issuer of the certificate.

[Chain]

[Confirm]

Checks whether there are any problems in the certificate chain (certificate path). To confirm the chain, refer to the external certificate managed in the system.

[Do Not Confirm]

Does not check whether there are any problems in the certificate chain (certificate path).

[Expiration Date Confirmation]

[Confirm]

Checks whether the certificate has expired.

[Do Not Confirm]

Does not check whether the certificate is lost.

[http Version Setting]

[http/1.1]

Select an http version.

[http/2, http/1.1]