Configure settings for communication using TCP/IP environment.
Setting item | Description | |
---|---|---|
[TCP/IP] | [ON] | Uses TCP/IP environment. |
[OFF] | Does not use TCP/IP environment. | |
[Network Speed] | [Auto (10M/100Mbps)] | Select the network speed from the menu list. |
[Auto (10M/100M/1Gbps)] | ||
[10Mbps Half Duplex] | ||
[10Mbps Full Duplex] | ||
[100Mbps Half Duplex] | ||
[100Mbps Full Duplex] | ||
[1Gbps Full Duplex] | ||
[IPv4] | Set the IPv4 address according to IPv4 environment used. | |
[IPv6] | Set the IPv6 address according to IPv6 environment used. | |
[RAW Port Number] | Set the port number of the RAW port used for Port9100 printing. | |
[DNS Host] | Set the host name used in the DNS server environment. | |
[DNS Domain Name Setting] | Set the domain name to suit the DNS domain you use. | |
[DNS Server Setting(IPv4)] | Configure the settings required to access the computer or server on the network from this system in the IPv4 environment. | |
[DNS Server Setting(IPv6)] | Configure the settings required to access the computer or server on the network from this system in the IPv6 environment. | |
[SLP Setting] | Configure the settings to use an SLP (Service Location Protocol)-compatible application. | |
[LPD Setting] | Enabling LPD (Line Printer Daemon) configures the setting to use LPR (LPD) printing. | |
[SSL Cert. Verify Error Set.] | Set the operation to be performed when an error related to the SSL certificate is detected to use the browser or OpenAPI/IWS application for SSL encryption communication. |