Manually enter a destination.
When sending a job to an unregistered destination, set this item.
The following items are required to register a destination.
The following setting is required to use [Proxy].
The registered name is displayed on the destination key.
Up to 24 single-byte characters (12 double-byte characters) can be entered.
Up to 24 single-byte characters (12 double-byte characters) can be entered.
When [Reference Name] is registered, the 1st character will be the search target.
When [Register Name] is entered, the same text as [Register Name] is registered automatically. Change the name as necessary.
Up to 253 single-byte characters can be entered.
Up to 127 single-byte characters (63 double-byte characters) can be entered.
Up to 32 single-byte characters can be entered.
Enter the account name using alphanumeric characters.
When registering the FTP server (Anonymous FTP) that does not require an account to log in, press [Anonymous] to enter "anonymous".
"Anonymous FTP" refers to an FTP used to share files with a large number of unspecified users.
Up to 32 single-byte characters can be entered.
The entered password is shown by "1".
For some Anonymous FTP servers, an email address may be used as a password.
The default port number is 00021. In general use, the default setting does not need to be changed. For details about the port number, contact your network administrator.
For details about [FTP TX Settings], refer to [FTP TX Settings].
If the destination is an external server, select [ON].