Sending to Your Address (Scan to Me)

If the user's E-mail address is registered while user authentication is installed on this machine, the key for sending an E-mail to you is displayed when you log in to this machine.

Selecting [Scan to Me] on the home screen allows you to easily send an E-mail only to you.

Also, the [Me] key is displayed in the address book on the [Scan to E-mail] screen. Setting the [Me] key as the address allows you to always send an E-mail to yourself using the same workflow as the regular E-mail sending.

Register an E-mail address in the user's registration information.

For details on the setting procedure, refer to Using the Scan to Me function.

Tips

• If Active Directory is used as an authentication server, register the user's E-mail address in Active Directory.

1

Load the original.

2

Enter user information, and log in to this machine.

• For details on how to log in, refer to When User Authentication is Enabled:.

3

Tap [Scan to Me] on the home screen to start transmission.

• To send after changing the option settings, tap the menu icon at the top of [Scan to Me] and proceed to step 4.

4

Change the transmission option settings.

5

Use the Start key to start transmission.

• Using the Stop key enables you to stop scanning the original. A list of the currently stopped jobs is displayed. To stop transmission, select the target job from the list, and delete it.

1

Load the original.

2

Enter user information, and log in to this machine.

• For details on how to log in, refer to When User Authentication is Enabled:.

3

Tap [Scan to E-mail] on the home screen.

4

Select [Me].

5

Specify transmission options as needed.

6

Use the Start key to start transmission.

• Using the Stop key enables you to stop scanning the original. A list of the currently stopped jobs is displayed. To stop transmission, select the target job from the list, and delete it.