Recalling a Program for Copying

Program is a function used to register a combination of various copy settings as a recall key. The program to be registered in the copy mode is referred to as a copy program.

There are two types of copy programs: normal program to register copy settings and image adjustment program to register only image settings.

When you register a copy program, you can simply recall a combination of various copy settings from the main screen.

Related setting (for the administrator)

• [Utility] - [Administrator] - [Security] - [Copy Program Lock Settings]
• [Utility] - [Administrator] - [Security] - [Delete Saved Copy Program]
• [Utility] - [Administrator] - [Security] - [Restrict User Access] - [Using the program function]

You can register up to 30 normal programs and up to three image adjustment programs.

1

Display the Copy screen of classic style.

2

Set copy options.

• Register the settings configured here as a program.

3

Tap [Program].

4

Select an unregistered key, and also tap [Register].

• To register an image setting, select an unregistered key from [Image Adjustment Programs].

5

Enter the program name, and tap [OK].

1

Load the original.

2

Display the Copy screen of classic style.

3

Tap [Program].

4

Select the program you want to recall, and tap [Recall].

• You can also recall a [Image Adjustment Programs] from [Original Type].

• Tapping [Check Setting] enables you to view the selected program settings.

5

Check that the setting has been reflected.

6

Use the Start key to start copying.

• If desired, tap [Check Setting] before starting a copy, and check the setting.