This section describes how to solve problems when the image quality is poor even after performing the "Adjusting Standards".
The operation items may differ depending on the options mounted on the system.
After performing the "Recommended Settings", it is recommended that you make adjustments according to the content of the trouble. For details, refer to the following.
With [Synchronize with Image Diagnosis (AQA)], you can select the items for adjustment to be performed automatically after performing [Image Diagnosis].
For details about [Image Diagnosis], refer to [Image Diagnosis].
For the adjustment, use the paper used when registering the target density.
Calibration should be performed on the paper used for the job.
Calibration should be performed on the paper used for the job.
- [Gamma Automatic Adjustment]
- [Maximum Density Adjustment]
- [Controller Calibration]
For details about [Controller Calibration], refer to About Normal [Controller Calibration].
Calibration should be performed on the paper used for the job.