Home Search by Purpose Configuring the Operating Environment of this MachineConfiguring Original Scan and Output Operations

Search by Purpose

Configuring Original Scan and Output Operations

Settings Anyone can Change

To specify a paper tray to be selected automatically when [Paper] is set to [Auto] ([Auto Tray Selection Settings])

 

To allow paper to be fed out from other tray when the specified paper tray runs out of paper ([Auto Tray Switch ON/OFF])

 

To specify an action to be taken when the specified paper is not loaded on any paper tray ([No Matching Paper in Tray Setting])

 

To change the default paper tray or printing method when printing a report or list ([Print Lists])

 

To specify the type and the size of paper to be loaded into the paper tray of the post inserter ([Post Inserter Settings])

 

To adjust the level to be judged between the color specified for [Auto Color] and black and white ([Auto Color Level Adjust.])

 

To allow copying of a small-sized original of which the size cannot be detected ([Auto Paper Select for Small Original])

 

To adjust the level to detect blank pages when scanning while removing blank pages in an original ([Blank Sheet Detection Level])

 

To always enable [Serial Scan] when scanning an original from the original glass ([Separate Scan from Platen])

 

Settings only the Administrators can Change

To change the timing to start printing at reception of print or fax data ([Print/Fax Output Settings])

 

To specify an output tray to preferentially feed out printed sheets ([Output Tray Settings])

 

To specify whether to sort printed sheets by job when feeding out them ([Shift Output Each Job])

 

To detect the original size or Foolscap paper size ([Standard Size Setting])

 

To specify whether to print stamps on blank pages inserted by the Cover Sheet and Insert Sheet functions ([Blank Page Print Settings])

 

To specify the printing priority sequence or an operation for skipping jobs that are not ready for printing ([Job Priority Operation Settings])

 

To specify the default type of paper to be loaded in the bypass tray ([Default Bypass Paper Type Setting])

 

To specify the position where to print a page number on the front and back sides when 2-Sided Print is specified ([Page Number Print Position])

 

To use custom paper with any paper name and paper type registered ([Set Paper Name by User])