[IWS Settings]
Overview
Configure the setting to use the IWS (Internal Web Server) function.
You can transfer the print data conversion application to this system and use the print data conversion function.
Tips
- Settings are required to use this function. For details, contact your service representative.
Setting Items
Setting item | Description | |
|---|---|---|
[IWS Settings]* | [ON] | Uses the IWS function. |
[OFF] | Does not use IWS function. | |
[Port Number (Web Server)]* | Sets the port number used for communication with the Web server. Range: 1 to 65535 | |
[Port Number (Application Installation)]* | Sets the port number used for communication with the tool connection server. Range: 1 to 65535 | |
[Connect IWS Apps to Network]* | [Allow] | Allows the transfer of the print data conversion application. |
[Restrict] | Prohibits the transfer of the print data conversion application. | |
*: If you have changed the setting of this item, turn the system power off and back on again.
in the upper-right of a page, it turns into 
and is registered as a bookmark.