[General Settings]
Overview
Configure settings for user authentication or account track of this system.
When authenticating, you can also set the number of counters to be assigned and the operation to be performed when the upper limit is reached.
NOTICE
- Use an authentication method other than the middle server authentication or a combination of the external server authentication and middle server authentication.
Setting Procedure
1
Select the user authentication method in [User Authentication].
[OFF] uses this system without [User Authentication].
[ON (External Server)] performs user authentication using an external server.
[ON (MFP)] manages the user name and password on this system, and directly performs authentication on this system.
2
In [Public User Access], configure settings to allow a public user's access.
[Restrict] prohibits a public user's access.
[ON (With Login)] allows a public user's access; however, it is necessary to log in as a public user when using this system.
[ON (Without Login)] allows a public user's access. To access, login operation is not required.
NOTICE
The following setting is required to use this function.
- Set [User Authentication] to [ON (External Server)] or [ON (MFP)].
3
Enter the expiration date of the Kerberos authentication ticket when you are using Active Directory as the authentication server on [Ticket Hold Time Setting (Active Directory)].
Range: 1 minute to 600 minutes
4
In [Account Track], configure settings to perform account track on this system.
5
In [Account Track Input Method], set the authentication method when performing account track.
In [Account Name & Password], enter the account name and password for authentication.
In [Password Only], only enter the password for authentication.
NOTICE
The following setting is required to use this function.
- Set [Account Track] to [ON].
6
In [Synchronize User Authentication & Account Track], configure settings to synchronize [User Authentication] and [Account Track].
NOTICE
The following settings are required to use this function.
- Set [User Authentication] to [ON (External Server)] or [ON (MFP)].
- Set [Account Track] to [ON].
7
In [Number of Counters Assigned for Users], enter the number of users that can be registered on this system.
Up to 1,000 [User Authentication] and [Account Track] can be registered. The remaining [Number of Counters Assigned for Users] set here are assigned to the number of account authentications.
Range: 1 to 999
NOTICE
The following settings are required to use this function.
- Set [User Authentication] to [ON (External Server)] or [ON (MFP)].
- Set [Account Track] to [ON].
8
In [When Number of Jobs Reach Maximum], set operations that this system performs when the number of jobs operated by each user or account reaches the specified upper limit.
[Stop Immediately] stops the job as soon as it reaches the upper limit. At this time, the output data and scan data stored until the time of suspension is deleted.
[Stop After Print] suspends after the job is complete.
[Warning Only] displays a warning, but continues printing. A warning is not displayed for print jobs.
Set the maximum number of jobs at the time of [User Registration] or [Account Track Settings]. For details, refer to [User Registration] or [Account Track Settings].
9
In [AD Auth. LDAP over SSL Port No.], configure settings to use LDAP over SSL on Active Directory. When using, set the port number for LDAP over SSL.
Range: 1 to 65535
in the upper-right of a page, it turns into 
and is registered as a bookmark.