Configure the setting to automatically adjust the date/time setting of this system.
The date/time of this system is adjusted using the NTP (Network Time Protocol) server.
Setting item | Description | |
---|---|---|
[Time Adjustment Setting] | [ON] | Uses time correction. |
[OFF] | Does not use time correction. | |
[Auto IPv6 Retrieval] | [Enable] | Automatically retrieves the IPv6 address. |
[Disable] | Does not acquire IPv6 address automatically. | |
[NTP Server Address] | Sets the NTP server address. To enter the value, select the [Please check to enter host name.] check box. | |
[Port No.] | Sets the port number used for communication with the NTP server. Range: 1 to 65535 | |
[Auto Time Adjustment] | [ON] | Automatically adjusts the time. |
[OFF] | Does not correct time automatically. | |
[Polling Interval] | Sets the polling interval for time adjustment. Range: 1 hour to 240 hours | |
[Adjust] | Connects to the NTP server, and adjusts the date and time of this system. |