Home CopySorting Copies to Secondary (Sub) Tray

Sorting Copies to Secondary (Sub) Tray

A machine mounted with Finisher FS-532 is initially set to output sorted sets to the primary (main) tray, regardless of whether or not to be mounted with other options. To deliver paper to the secondary (sub) tray, follow the procedure below to change the output tray and select the desired output mode.

  1. Position the original.

  2. Press the [COPY] tab to display the [COPY] screen.

  3. Press [Output Setting].

    The [Output Setting] screen is displayed.

  4. Select the secondary (sub) tray as output tray.

    • Press the tray position button of the secondary (sub) tray.

  5. Select the desired output mode.

    • Select either [Sort] or [Group] provided under [Output].

    • Select either [Face Up] or [Face Down], and either [1 to N] or [N to 1] provided under [Face/Order], as needed.

    • Selecting [N to 1] automatically sets and limits the Face mode to [Face Up].

  6. Press [OK] on the [Output Setting] screen.

    An icon representing specified output mode is displayed under [Output Setting] on the [COPY] screen.

    • The secondary (sub) tray has a limit in capacity. Be careful not to exceed the limit, otherwise unexpected trouble may be caused