Home CopySorting Copies to Output Tray

Sorting Copies to Output Tray

Select an output mode by following the procedure below.

  1. Position the original.

  2. Press the [COPY] tab to display the [COPY] screen.

  3. Press [Output Setting].

    The [Output Setting] screen is displayed.

    • On the front image of the machine in the [Output Setting] screen, the tray currently selected is highlighted.

  4. Select the desired output mode.

    • Select one of [Offset Sort], [Sort], [Offset Group], and [Group] keys.

    Selecting [Offset Sort] or [Offset Group] displays the screen to specify the output offset. Use the touch panel keypad to enter the desired number of sets to be offset. Available range is from 1 to 9,999. When finished with the entry, press [OK].

    • Select either [Face Up] or [Face Down], and either [1 to N] or [N to 1] provided under [Face/Order], as needed.

    • Selecting [N to 1] automatically sets and limits the Face mode to [Face Up].

  5. Press [OK] on the [Output Setting] screen.

    An icon representing specified function is displayed under [Output Setting] on the [COPY] screen.

    • Up to 150 sheets can be loaded into the output tray. Be careful not to exceed the limit, otherwise unexpected trouble may be caused