Home CopyOverview of Application

Overview of Application

Various settings can be performed to match finished results.

How to set application

When copying using an Application Setting, select the desired functions on the [Application] screen.

  1. Press [COPY] tab on the screen.

  2. Press [Application] on the [COPY] screen.

    The [Application] screen is displayed.

    When pressing a button for each function, the corresponding screen to set the function is displayed (no corresponding screen for [No Image Area Erase] and [Image Centering], [Full Image Area], and [Negative/Positive Reverse]).

    Various functions can be used in combination, however, if one function on the menu is incompatible with another, it will appear dimmed.

    To resume the previous copy conditions, press [Cancel]. Press [All OFF] to clear all the application selections with the setting made for each saved. To resume the default setting for all copying features including [Output Setting], press Reset on the control panel.

  3. Press [OK] on the [Application] screen to return to the [COPY] screen.

    • Printing does not start without returning to the [COPY] screen. Be sure to display the [COPY] screen when you start printing.