Home CopySpecifying the Horizontal Zoom and Vertical Zoom for Copy

Specifying the Horizontal Zoom and Vertical Zoom for Copy

Specify the desired ratio for the horizontal zoom and vertical zoom, and make copies of which the aspect ratio is different.

  • For [Vertical Zoom] and [Horizontal Zoom], individually specify the zoom ratio from 0.250 to 4.000 in 0.001 (0.1%) increments.

    • To use this function, a setting service by a customer engineer is required. For details, contact your service representative.

  1. Press the [COPY] tab to display the [COPY] screen.

  2. Press [Zoom].

    The [Zoom] screen is displayed.

  3. Specify the desired zoom ratio.

    • Select [Vertical Zoom] or [Horizontal Zoom], and press the keypad on the screen or the [] or [] key to enter the zoom ratio.

    • If wrong number is entered, continue by entering the correct number from the beginning.

    • Holding down the [] or [] key changes the ratio in 0.001 (0.1%) steps at first, and then in 0.010 (1%) steps.

  4. Press [OK].

    This returns to the [COPY] screen.

    The ratio values of the vertical zoom and horizontal zoom are displayed under [Zoom].