Preparation Required to Use This Function (for the administrator)

To use this machine by connecting it to a wireless network environment, follow the below procedure to configure the settings.

Set a network interface configuration of this machine.

Select [Network] - [Network I/F Configuration] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the settings. For details, refer to [Network I/F Configuration].

When [Wired + Wireless (Sec. Mode)], [Wired + Wireless (Primary Mode)], or [Wired + Wireless (Wi-Fi Direct)] is selected in [Network I/F Configuration], configure settings to connect this machine to the wireless network environment using TCP/IP.

Select [Network] - [TCP/IP Setting] - [TCP/IP Setting1] - [Wireless Setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the settings. For details, refer to [TCP/IP Setting1].

Tips

• For the wireless network address, specify a private IP address or other address that is different from the wired network address. If the same network address group is specified, it will disable a transmission from this machine to the wired network.

If [Wireless Only] or [Wired + Wireless (Sec. Mode)] is selected in [Network I/F Configuration], configure settings to operate this machine as a wireless LAN adapter.

Select [Network] - [Wireless Network Setting] - [Wireless LAN Adapter] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the settings. For details, refer to [Wireless LAN Adapter].

If [Wired + Wireless (Primary Mode)] is selected in [Network I/F Configuration], configure settings to use this machine as a wireless LAN access point.

Select [Network] - [Wireless Network Setting] - [Main Device Wireless Setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the settings. For details, refer to [Main Device Wireless Setting].

When [Wired + Wireless (Wi-Fi Direct)] is selected in [Network I/F Configuration], configure settings to operate this machine as a Wi-Fi Direct group owner.

Select [Network] - [Wireless Network Setting] - [Main Device Wireless Setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the settings. For details, refer to [Main Device Wireless Setting].

Tips

• For details on the Wi-Fi Direct connection method, refer to the user's manual of your terminal.