Setting the Serverless Pull Printing Group Configuration
Searching for devices on the network for setting
1
Start the LK-114_SetupTool execution file.
2
Click [Search Devices].
The devices for which the serverless pull printing function is enabled are displayed in the list.
3
Configure device information in [Device Setting Information] to update the list contents.
To change the device information in the list, select the desired device information, change the [Device Setting Information] setting, and click [Apply].
To add new device information to the list, set the information of the device to be added in [Device Setting Information], and click [Add].
To delete the device information from the list, select the desired device information, click [Delete].
4
To apply the list contents to the device, click [Apply setting to Devices].
5
When the setting is complete, exit LK-114_SetupTool.
If the list has been updated, the file save window is displayed when you exit LK-114_SetupTool, and you can save the configuration file. The configuration file can be loaded the next time LK-114_SetupTool is started.
Tips
- When composing a serverless pull printing group involving different models, you need to permit the quick authentication. Select [Utility] - [Administrator] - [User Auth/Account Track] - [Simple Authentication setting] - [Simple Authentication setting], and [Simple Authentication setting] to ON.
Acquiring group information from the topology machine for setting
1
Start the LK-114_SetupTool execution file.
2
Click [Acquire setting from Topology Machine].
3
Enter the IP address of the topology machine to acquire the setting, and the user name and password for OpenAPI authentication. Then, click [Acquire].
The serverless pull printing group information in the domain is displayed in the list.
4
Configure device information in [Device Setting Information] to update the list contents.
To change the device information in the list, select the desired device information, change the [Device Setting Information] setting, and click [Apply].
To add new device information to the list, set the information of the device to be added in [Device Setting Information], and click [Add].
To delete the device information from the list, select the desired device information, click [Delete].
5
To apply the list contents to the device, click [Apply setting to Devices].
6
When the setting is complete, exit LK-114_SetupTool.
If the list has been updated, the file save window is displayed when you exit LK-114_SetupTool, and you can save the configuration file. The configuration file can be loaded the next time LK-114_SetupTool is started.
Tips
- When composing a serverless pull printing group involving different models, you need to permit the quick authentication. Select [Utility] - [Administrator] - [User Auth/Account Track] - [Simple Authentication setting] - [Simple Authentication setting], and [Simple Authentication setting] to ON.
Loading the saved configuration file for setting
You can load only the configuration file saved when exiting LK-114_SetupTool.
1
Start the LK-114_SetupTool execution file.
2
Click [View configuration file].
3
Specify the configuration file to load.
The configuration information of the serverless pull printing group described in the configuration file is displayed in the list.
4
Configure device information in [Device Setting Information] to update the list contents.
To change the device information in the list, select the desired device information, change the [Device Setting Information] setting, and click [Apply].
To add new device information to the list, set the information of the device to be added in [Device Setting Information], and click [Add].
To delete the device information from the list, select the desired device information, click [Delete].
5
To apply the list contents to the device, click [Apply setting to Devices].
6
When the setting is complete, exit LK-114_SetupTool.
If the list has been updated, the file save window is displayed when you exit LK-114_SetupTool, and you can save the configuration file. The configuration file can be loaded the next time LK-114_SetupTool is started.
Tips
- When composing a serverless pull printing group involving different models, you need to permit the quick authentication. Select [Utility] - [Administrator] - [User Auth/Account Track] - [Simple Authentication setting] - [Simple Authentication setting], and [Simple Authentication setting] to ON.
in the upper-right of a page, it turns into 
and is registered as a bookmark.