[TCP Socket Setting]
Overview
Configure the setting to communicate with this system using TCP Socket.
Configure this setting when using the communication function with the TWAIN driver or using the Flash Player function such as tray information in Web Connection.
Enabling [TCP Socket(ASCII Mode)] enables you to display Web Connection in the flash format.
NOTICE
- If you have changed the setting, turn the system power off and back on again.
NOTICE
The following settings are required to enable [Use SSL/TLS].
- Registration of the certificate of this system
- Set SSL communication.
Reference
- For details on the certificate, refer to [Device Certificate Setting].
- For details about SSL communication, refer to [SSL Setting].
Setting Items
Setting item | Description |
|---|---|
[TCP Socket] | Uses the communication function (TCP Socket) using the TWAIN driver. To set [Port Number], select this check box. |
[Port Number] | Sets the port to establish a communication using the TWAIN driver. Range: 1 to 65535 |
[Use SSL/TLS] | Uses SSL to establish a communication using the TWAIN driver. To set [Port No.(SSL/TLS)], select this check box. |
[Port No.(SSL/TLS)] | Sets the port number for SSL/TLS communication. Range: 1 to 65535 |
[TCP Socket(ASCII Mode)] | Uses TCP Socket (ASCII Mode). To set [Port No.(ASCII Mode)], select this check box. |
[Port No.(ASCII Mode)] | Sets the port number of TCP Socket (ASCII Mode). Range: 1 to 65535 |
in the upper-right of a page, it turns into 
and is registered as a bookmark.