Configure the setting to detect this system using the Web service.
Setting item | Description | |
---|---|---|
[Friendly Name]* | Sets the name of this system on the Web service. Up to 62 single-byte characters can be entered. | |
[SSL Setting] | [ON] | Specify whether to use SSL. This function is displayed when the certificate is installed. |
[OFF] | ||
[Publication Service] | [Enable] | Enables Publication Service. Select this item when NetBIOS is disabled or Only IPv6 is used for communication. |
[Disable] | Disables Publication Service. | |
[Certificate Verification Level Settings] | ||
[Validity Period] | [Confirm] | Checks whether the certificate's expiration date is valid. |
[Do Not Confirm] | Does not check whether the certificate's expiration date is valid. | |
[Key Usage] | [Confirm] | Checks whether the certificate is used according to the intended usage approved by the issuer of the certificate. |
[Do Not Confirm] | Does not check whether the certificate is being used according to the usage approved by the issuer of the certificate. | |
[Chain] | [Confirm] | Checks whether there are any problems in the certificate chain (certificate path). To confirm the chain, refer to the external certificate managed in the system. |
[Do Not Confirm] | Does not check whether there are any problems in the certificate chain (certificate path). | |
[Expiration Date Confirmation] | [Confirm] | Checks whether the certificate has expired. |
[Do Not Confirm] | Does not check whether the certificate is lost. |
*: If you have changed the setting of this item, turn the system power off and back on again.